Skip to Content
  1. All products
  2. Article type
  3. Pressure sprayers
  4. 3132UE
  5. Pressure sprayers
Pricelist: MSRP Pricelist
Pricelist: MSRP Pricelist

3132UE

(0 review)

Pressure sprayer 0.4 gal for use in the cleaning trade, for disinfection, vehicle cleaning, corrosion protection, impregnation.

The pressure sprayer has a fill capacity of 0.4 gal, is made of plastic and features a level scale and a safety valve. EPDM seals provide excellent resistance to many cleaning agents. The flat jet nozzle is also made of plastic. The durable 0.4 gal device is a reliable and long-lasting helper even with the most aggressive agents. All devices of the CLEANER series are equipped with a protection cap and a specially coated spring for improved chemical resistance,; the non-return valve therefore does not come into direct contact with the liquid. The closed pump head protects against dirt. The product also has a 360° overhead spray function. An additional adjustable nozzle completes the device.

Colored 5266PP spray wands (green, blue, red) are optionally available for this purpose to determine the area of application.

Application: ph value 7  - 14

Ideal for: Cleaning trade, industry - vehicle cleaning, disinfection, corrosion protection, impregnation

$ 39.99 $ 39.99
Contact Us
Terms and Conditions
30-day money-back guarantee
Shipping: 2-3 Business Days

The pressure sprayer CLEANER 360° E1.5 is particularly popular due to its innovative design registered at the Trademark Office and the special durability of the tank, hose and seals. With our practical cleaning aids CLEANER 360° E1.5, you can apply alcohols as well as alkaline agents safely and conveniently. And the extra durable flexible hose combined with our convenient 360° spray function allows you to even spray „upside down“ in places that are normally difficult or impossible to reach.  

 
Product classPerformance ****
Spraying agentsAlkaline cleaning agents, Alkaline disinfectants
EAN4000903003173
Fill capacity1.5 l
Total contents1.8 l
Weight0,52 Kg
Article typePressure sprayers
IndustryCleaning, Industry, Motor and commercial vehicles
ApplicationsDisinfecting, Cleaning
Max. operating pressure3 bar/44 psi/0.3 MPa
Tank materialPlastic
Portabilityhand portable
Nozzle typeAdjustable: Spot to full jet, Spray nozzle
Nozzle materialPlastic
Spray wand materialPlastic
Spray wand length5 cm
Safety valveja
Pressure gaugewithout
Compressed air filler valveno
Scope of delivery generaltank, Nozzle(s), Instructions for use, Pump, Spray wand
Device equipmentExtra large filler opening for simple filling., Foot ring for a sturdy foothold even on uneven surfaces.Base with foot ring for sturdy foothold when pumping., Level scale with viewing strips for simple reading., Plastic protection cap for improved chemical resistance., Spray head with specially coated spring for improved chemical resistance., Particularly chemical-resistant equipment for very aggressive liquids., Completely enclosed spray head is easy to clean and protects against malfunctioning due to contamination., 2 in 1 valve enables automatic pressure release in case of overpressure and manual pressure release, if required., Ergonomic handle for comfortable working., chemical-resistant special hose., 360° swiveling and also allows upside down spraying!, Adjustable nozzle from spot jet to fine, even atomization.

Devices may not be used for spraying plant protection liquids.

Only trained, healthy and rested people may work with the device. You should not be under the influence of alcohol, drugs or medication.

Children and adolescents must not use the device. Keep the spraying devices safe from access to children.

Take precautions to prevent hazardous substances from being misused.

→ Accident risk!

Keep bystanders away during spraying.

Never spray on people, animals, electrical devices and lines, into the wind, or into bodies of water.

→ Risk of injury!

Wear appropriate protective clothing, goggles and respiratory protection in line with the applicable national regulations when working with hazardous substances.

Avoid ignition sources in the environment.

Do not allow the device to remain under pressure and/or exposed directly to sunlight. Make certain the device is not heated beyond the maximum operating temperature. (→Table 1).

Protect the device from frost and ammonia.

Never blow through the nozzles or valves with your mouth.

→ Risk of poisoning!

There is a risk of slipping or tripping on smooth or wet surfaces, snow, ice, on slopes and on uneven terrain.

Repairs and modifications to the device are not permitted. Have damaged parts or parts that do not work properly repaired immediately by our customer service department or by service partners authorized by us.

The effect of the safety valve must not be bypassed or made inoperative.

→ Explosion hazard!

Use only original spare and accessory parts. We cannot assume any liability resulting from the use of third-party parts.

When pumping, always observe the pressure gauge to ensure the maximum

spraying pressure is not exceeded (→ Table 1).

All excess pressure must be released from the device before filling, after use, before carrying out maintenance work, on work breaks, and before placing it in storage.

Points to note when transporting the device: Transport the device in such a way that it is protected against damage and tipping. All excess pressure must be released from the device.

→ Explosion hazard!

If the device leaks at the container, immediately depressurise the device and put it out of operation!

→ Risk of explosion!